In order to help customers to make a further decreasing in the production cost, and also to protect the environment and recycle the non-renewable resources, (PPG) Project PCD Grinding from MORESUPERHARD supply provide
regrinding/resharpening service for PCD/CBN/ND/CVD/MCD tools, especially for complex tools which is edge broken or not sharp.
PCD Tools Resharpening/Regrinding and Retipping |
|
What is tools resharpening? |
Tools resharpening is a process of renew your old tools by cutting or grinding. It gives your old tools new life with low cost in a short time. |
Why resharpening PCD tools? |
Simply, it saves your money. When your tools are dull, broken, or running out of precision, resharpening them is a better option than throwing them away. It saves your 20% -- 75% cost depend on different PCD/PCBN/MCD/ND/CVD tools. And it also saves your time than buying a new tool. |
Which tool is good to resharpen? |
The simpler the tool, the better it is to regrind.
The Design, coating, complexity, application and the price of the tool are all determined a tool whether worth to regrind or not. |
What is advantage of PCD tools regrinding? |
√ Save your money.
√ Properly PCD tools regrinding can greatly extend the working-life of tools.
√ Improve the precision of tools.
√ It is a green option, it protects the environment and recycle the non-renewable resources. |
How MORESUPERHARD resharpen the PCD tools? |
We choose the most suitable diamond wheels, usually the 1000-3000# grit wheels to get a allowed chipping, maybe 7μm or 5 μm,usually the normal PCD tools can be resharpened 2-3 times. |
When can't resharpening?
|
If the size and the radius can’t get your requirement after times resharpening, we can reset/retip the new PCD tips on the cutting tools. If it's just dull (edge breakdown) and you can stand to lose diameter, a regrinding to get back to solid edge diamond is mostly just labor and grinder time.
|
PCD tools, CBN tools and monocrystal diamond tools are much expensive than carbide tools and HSS tools. It is a waste to throw them away when use them up or tips broken. We can re-braze a new PCD, CBN or MCD/CVD tip on your used tools by recycling carbide bodies or a running out superhard cutting tools after a few times resharpening.
1.A lase cutting machine or an EDM wire cutting machine is used to the cut the tips into proper shape and size at the very first.
2. Then we use vacuum brazed machine or high frequency brazed machine to braze the tips on recycling carbide bodies.
3. With a PCD/CBN tools grinder, we choose the right diamond grinding wheel to give a solution of getting high precision cutting radius and smooth cutting edge
4. After the professional and strict dimension measurement, we package them with new safe box carefully.
5.You get a brand-new tool again but with only 50%-60% cost.
Solid CBN inserts regrinding
MORESUPERHARD will evaluate and recommend all possible regrindindg and downsizing for your solid CBN inserts. Save 50% cost by get the most life possible out of your solid CBN tools.
Moresuperhard provide quality cnc diamond grinding wheel for grinding rotary cutting tools.1A1,1V1,11V9,12V9 abrasives grinding wheel suit for anca,walter,ewag cnc grinding machine.1. Suitable for high-efficiency grinding processing with rapid feed.2. Good wear resistance and shape retention.3. It has good self-sharpening properties, generates less heat during grinding, reduces burns on the workpiece, and meets the high-precision requirements of the tool.4. No clogging, easy to trim, extend the trimming cycle and reduce processing costs. 5. The cutting edge quality of the grinding workpiece is consistent and the smoothness is high, which ensures stable quality when processing downstream products.
At present, the main diamond processing methods include mechanical polishing, thermochemical polishing, tribochemical polishing, laser polishing, ion beam polishing and chemical mechanical polishing.Due to the anisotropy of diamond, "hard" and "soft" polishing directions have completely different material removal rates.Experimental results show that atomic-level roughness values can be obtained in a shorter time by mechanical polishing in the crystallographic directions <100> and <110> or in another direction deviating from <110> at an angle not exceeding 20°.
Add: Zhongyuan Rd, Zhongyuan District, Zhengzhou, 450001, Henan, China
Tel: +86 17700605088