Currently, more and more non-metallic materials are being used rapidly. For example, composites, plastics, ceramics, and countless other materials are being replaced by CFRP.

In order to ensure the processing of all kinds of concave and convex lens and Fresnel lens mould can have the ideal curvature radius with very high replication and stability,

The Stahli Model DLM 700 flat-honing machine’s simultaneous top-and-bottom finishing of carbide inserts expands Spartan Carbide’s production capabilities.

The design value of the outer diameter of the reamer is too large or the reamer has burrs; The cutting speed is too high; Improper feed rate or excessive machining allowance;

We can supply single crystal diamond stone for diamond side milling tools,the holder is tungsten steel that not easy to heat and reduce the number of tools changes

It is possible to make auto parts with aluminum alloy instead of steel because of its advantages such as light weight, high specific strength, corrosion resistance, good formability and recycling.

The RS series manual universal grinding machine of Ewag have excellent performance in grinding superhard materials such as PCD tool edges for over 30 years. Ewag manual grinding machines are used to g...

Abstract: Based on the repair test of MAPAL reamer guide strip, this article discusses the theory and practice of grinding superhard material guide tools, which has guiding significance in the grindin...